Project

General

Profile

Actions

Filter Replacement » History » Revision 8

« Previous | Revision 8/12 (diff) | Next »
stuge, 02/19/2016 10:48 PM
Link to Sylvain's page with original description


Motorola filter replacement

To replace filters on Motorola phones you will need:

As the shipping cost for such a small-quantity order is relatively high, a complete component kit is
available for online order from http://shop.sysmocom.de/products/osmocombb-filter-kit

=== Remove existing baluns ===

First you will need to remove existing balun:

Image(motorola_filter_replacement_step_1_low.jpg, 250px)
Image(motorola_filter_replacement_step_2_low.jpg, 250px)

=== Solder new baluns ===

Clean up the phone and solder HHM1526 and HHM1523C1 on the right places (the black dot goes up):

Image(motorola_filter_replacement_step_3_low.jpg, 250px)
Image(motorola_filter_replacement_step_4_low.jpg, 250px)
Image(motorola_filter_replacement_step_5_low.jpg, 250px)

=== Solder ceramic capacitors ===

Last step is to solder ceramic capacitors 04025A150JAT2A and 04025A220JAT2A:

Image(motorola_filter_replacement_step_6_low.jpg, 250px)
Image(motorola_filter_replacement_step_7_low.jpg, 250px)

=== Credits ===

Thanks to [http://246tnt.com/gsm/rx_filter.html Sylvain] and Peter who made this possible.

Files (12)

Updated by stuge about 8 years ago · 8 revisions

Add picture from clipboard (Maximum size: 48.8 MB)