Revision 01fb365d
Added by Kévin Redon over 4 years ago
hardware/README | ||
---|---|---|
1 |
here you will find the files related to the hardware aspect of SIMtrace. |
|
2 |
|
|
3 |
the hardware for SIMtrace (1) and SIMtrace 2 is almost the same. |
|
4 |
the main difference is the micro-controller. |
|
5 |
SIMtrace (1) uses an Atmel AT91SAM7S micro-controller. |
|
6 |
This micro-controller has been deprecated for some time and needed to be replaced. |
|
7 |
SIMtrace 2 uses am Atmal ATSAM3S. |
|
8 |
Because the micro-controller architecture is difference, the firmware has been rewritten from scratch. |
|
9 |
The firmware for SIMtrace 2 will not work on SIMtrace boards with AT91SAM7S micro-controllers. |
|
10 |
|
|
11 |
folders |
|
12 |
======= |
|
13 |
|
|
14 |
- releases: archives containing schematic and fabrication output of the various SIMtrace versions |
|
15 |
- kicad: the source files for the hardware design (schematic and board layout) |
|
16 |
- pcd: schematic and fabrication output of the current SIMtrace version |
|
17 |
- datasheet: collection of datasheets for parts used by SIMtrace |
|
18 |
- geda: an initial trial of redesigning SIMtrace, abandoned |
|
19 |
|
|
20 |
changelog |
|
21 |
========= |
|
22 |
|
|
23 |
v1.5 |
|
24 |
---- |
|
25 |
|
|
26 |
updated schematic: |
|
27 |
- made more readable |
|
28 |
- uses SAM3S micro-controller for SIMtrace 2 |
|
29 |
- has several parts marked as Do Not Place (DNP) since they are not required anymore by the SAM3S |
|
30 |
|
|
31 |
the board layout is the same as v1.4. |
|
32 |
you just need to use the updated BOM with new micro-controller and fewer parts. |
|
33 |
|
|
34 |
see SIMtrace.csv for DNP parts. |
|
35 |
the BOM.ods is outdated but still provided some links for the parts. |
Also available in: Unified diff
add README wit hardwar eproject details
Change-Id: Ie5f2ac7d15d28e44abb60fdbc16f3e9f97544b03